Learn about your AC

The condenser coil on an AC is in the outdoor air conditioning unit.

It receives the high pressure plus temperature refrigerant of the cooling system compressor; You can assume it works as the opposite of the evaporator coil. The evaporator coil contains chilly refrigerant inside while the condenser coil contrans moderate refrigerant. The condenser coil is where the volume of heat is detached from the refrigerant. After the gas refrigerant is pressurized plus quickly heated in the compressor, it enters the condenser coil. Two things then happen in the system. The gas refrigerant transfers its heat to the air blowing over it. At the same time, the refrigerant cools plus turns into a liquid. The air around the coil will start to warm up plus is blown out of the outdoor unit… Condenser coils need to be properly maintained and cleaned in order to continue functioning officially for long periods of time. A very dirty condenser coil can lead to inefficient performance plus shortened cooling system life. Over time, the refrigerant flowing through the evaporator’s coils wears right down the inner lining plus makes the coils weaker. Certain coil cleaners can also massively corrode plus weaken the outer lining of the coils. The weaker the coils, the more unfortunately prone they are to developing refrigerant leaks. With the switch to R-410a refrigerant, cooling systems that need the condenser coil upgraded often have to upgrade the entire lineset plus evaporator coil as well. This is because outdated R-22 refrigerant cannot properly mix with R-410A. When a supplier tells you that an entire method needs to be properly upgraded in this situation, do not assume that they are trying to scam you out of money. Also in some situations, replacing just the evaporator coil really means it will mismatch with your condenser plus if they mismatch, you are easily going to run into some issues.

Website information